DYNAUDIO BM6A Nearfield Monitor

Descripción

Nearfield Monitor. 2 Vias 7', Tweeter softdome 1', Dual Ampli.100w MOSFET.C/Uno.

Introduction
BM6A
The Dynaudio nearfield experience.

The BM 6A features an electronic 4th order phase-aligned crossover with a crossover point at 2.2kHz, which feeds two high performance discrete MOSFET amplifiers rated at 100W each.

The low frequency section is driven by a low frequency equalizer offering a choice between extended, critical damped response or more conventional higher Qt response for more level but less low frequency output. Included in the electronics is a complex protection circuit, which helps to prevent accidental damage to the drivers, yet still providing maximum transient response.

The BM 6A is housed with an elegant matte cabinet with radius edged construction on the front baffle to reduce boundary effects and improve overall sound quality.

Features
Two high performance discrete MOSFET amplifiers

4th order phase-aligned crossover

Handcrafted drivers with aluminum voice coils

Made in Denmark

I don’t need to hear speakers really loud. I just need to hear them clearly – that’s the most important thing

Daniel Miller

STUDIO MASTER DANIEL MILLER
Monitor Placement In Smaller Studios
Ask The Expert

Choosing by Ear
A guide to choosing the right loudspeaker

Technical specifications
Specification sheet for Classic BM Range part 2
System: 2-way Active Nearfield Monitor
Frequency Response: 41Hz - 21kHz
Max SPL 1m, pair (IEC Long Term): 118dB RMS
Max SPL 2m, 5.1 (IEC Long Term): 119,5dB RMS
Input level for 85 dB SPL @ 1m (+4/-10): -12dBu RMS / -28 dBu RMS
Input level for max peak SPL (+4/-10): +16dBu peak / -1dBu peak
Power consumption: Idle: 25W / Max: 200W
Amplifier power: Tweeter: 100W / Woofer: 100W
Resonance Frequency: 49Hz
Specification sheet for Classic BM Range part 1
Internal Cabinet Volume: 9,5 liters
Principle: Bass reflex
Crossover Frequencies: 2200Hz
Crossover Slope: 24dB/oct
Tweeter: Esotec 28mm soft dome, rear chamber, Magnetic fluid. 4 mm die-cast alu front,
Woofer: 17cm, 75mm pure alu wire voice coil, One piece molded polypropylene cone
Weight: 11kg
Dimensions (WxHxL): 217 x 338 x 321mm