FOCUSRITE Scarlett OctoPre

Descripción

8-channel mic/line preamp expansion with ADAT output - 8 x 2nd-generation Scarlett mic/line pres, 8 line outputs, fed from mic preamps - Up to 24-bit/192kHz AD/DA for high-resolution audio - ADAT outputs (8 channels at up to 48kHz, 4 channels at 96kHz, 2 channels at 192kHz) - Mic pres and front-panel instrument inputs engineered with generous headroom - 5-segment LED metering and channel clip indicators - 48-volt phantom power available across all inputs (switchable: 1-4, 5-8) - Word clock I/O

The Sound of Scarlett - and more of it
Scarlett OctoPre gives you eight additional inputs. It's the ideal way to expand your Scarlett - or any other interface with an ADAT input.
WATCH PROMO



Scarlett OctoPre Mic PreEight Scarlett 2nd Generation mic preamps
Scarlett OctoPre features eight 2nd Generation Scarlett mic inputs - balanced line inputs too - all running through Focusrite precision 24-bit conversion at up to 192 kHz resolution with 109dB dynamic range.

Roll over to magnifyScarlett OctoPre Front and Rear

Dual front-panel instrument inputs
Two high-headroom instrument inputs will handle high output guitar pickups and are right there on the front panel for easy access.Scarlett OctoPre Mic PrePlenty of headroom.
Pads for the most extreme inputs
With high-headroom inputs and a pad on every channel, Scarlett OctoPre is ideal for tracking drums as well guitars, keyboards, vocals - and more.



Outputs for live or stand-alone use
Eight balanced line outputs, sourced directly from the inputs allow Scarlett OctoPre to be used in a live situation whilst capturing the recording via the digital ADAT output.Scarlett OctoPre Rear

About ADAT
ADAT is a simple and easy way of expanding your analogue inputs. ADAT uses inexpensive "light-pipe" optical cables to carry up to eight channels of audio. Just connect the ADAT output on the OctoPre to the ADAT input on your interface, set your sample rate and clock source and you're ready to go. ADAT input is available on many Focusrite and third-party interfaces.



Need D-A/Outputs as well as Inputs?
Compression?
If you need more inputs as well as more outputs check out the Scarlett OctoPre Dynamic - everything you see here, plus eight channels of pristine D-A conversion and analogue compression on every input. It might be just what you're looking for.Scarlett OctoPre Dynamic

User Guides
Sometimes you just need to see how adding new equipment to your setup is going to work. Find out just how easy it is to get the benefits of Scarlett OctoPre, along with some example setup examples and diagrams here.
DOWNLOAD SCARLETT OCTOPRE USER GUIDE

Tech SpecSupported Sample Rates
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzMicrophone Inputs
Frequency Response
20Hz - 20kHz +0.5/-1.5dB
Dynamic Range
109 dB (A-Weighted)
THD+N
<0.001%
Noise EIN
-127 dBu
Maximum input level (without pad)
+8 dBu
Maximum input level (with pad)
+16 dBu
Gain Range
50 dB
Input Impedance
3 kOLine Inputs
Frequency Response
20Hz - 20kHz +0.5/-1.5dB
Dynamic Range
109 dB (A-Weighted)
THD+N
<0.002%
Maximum input level
+22 dBu
Gain Range
50 dB
Input Impedance
49 kOInstrument Inputs
Frequency Response
20Hz - 20kHz +0.5/-1.5dB
Dynamic Range
108 dB (A-Weighted)
THD+N
<0.01%
Maximum input level
+13 dBu
Gain Range
50 dB
Input Impedance
1 MOLine Outputs
Maximum Output Level (0 dBFS)
+16dBu @ 0dBFS, or >21dBu where ADAT output is not used
THD+N
<0.001%
Ouput Impedance
136 O (Balanced)