KALI AUDIO IN5 Monitor Estudio 5" Activo

Descripción

IN-5

Powered: Yes
Amp Class: D
DSP Functions: Loudspeaker Tuning, Limiter, Crossover, Boundary EQ Settings
Power Config: Tri-Amped
LF Power: 80 W
Mid-Range Power: 40 W
HF Power: 40 W
Total Power: 160 W
LF Driver: 5-Inch Paper
Mid-Range Driver: 4-Inch Optimized Profile Paper
HF Driver: 1-Inch Textile Dome
Freq. Response (-10 dB): 39 Hz - 25 kHz
Freq. Range (±3 dB): 47 Hz - 21 kHz
LF to Mid-Range Crossover: 280 Hz
Mid-Range to HF Crossover: 2800 Hz
Recommended Listening Distance: 0.2 - 2.2 Meters
Max SPL: 115 dB

Project Independence
Kali’s IN-Series monitors are some of the most innovative studio monitors ever made. Combining the natural advantages of a 3-way design with hyper-realistic imaging of a co-axial mid-range and tweeter, they offer more transparency, lower distortion, and a soundstage that must be heard to be believed.

Performance
Unrivaled Punch and Detail.
The IN-Series monitors are unlike anything you’ve ever heard. The three-way design lets both the woofer and the tweeter do less work, resulting in better headroom and lower distortion across the frequency spectrum.

At the same time, the coaxial architecture of the midrange and tweeter result in hyper-realistic imaging. This means that you’ll be able to hear subtle details in your mix with pinpoint precision.

The design of the system comes together to allow the IN-Series monitors to act as acoustic point sources. They enjoy all the benefits of both traditional 3-way systems and traditional coaxial speakers, with none of the drawbacks traditionally associated with either.

All of this make the IN-5 and IN-8 extremely accurate and easy to mix on. You’ll be able to work faster and with more confidence, and your mixes are going to translate to other systems with less work.

The single most important aspect of a studio monitor is its accuracy. A good studio monitor should present the material it’s playing faithfully, allowing you to make critical decisions that you know will translate to all the systems that your work will ultimately be played on.
Not only do the IN-Series monitors accomplish this, but their coincident architecture allow them to be more accurate than other speakers in a wider variety of challenging acoustic environments.
You can find a full set of third party measurements for both the IN-5 and the IN-8 2nd Wave below:

Because of the IN-Series' coincident architecture, you may notice a dip between 8-10 kHz when measuring with a single stationary microphone. The dip is an on-axis diffraction artifact of the midrange baffle interface. It is evident in on-axis measurements, but not in total sound power. Perception of timbre should be neutral in most rooms. It is not recommended to apply room-correction EQs to the INs based on single point static measurements.